ULTRA-RELIABLE, EASY-TO-INSTALL UPB SWITCHES!!
UPB DIMMER SWITCH BODY, SHORT 2-4 ROCKER
NOW 900 WATT LOAD CAPACITY
UNIVERSAL TRANSCEIVER BASE
Most flexible UPB switch/transceiver base in the market today. Also comes standard with 900 Watt load carrying capacity plus the ability to transmit mutiple link/scene commands.
Simply Automated’s SimplyBrilliant™ Universal Dimming Transceiver Switches provide the same ultra-reliable control as our Standard Dimming Transceiver Switches, while offering greater flexibility. Each unit has one switch that controls a single load of up to 900W, and can be field-configured to accept single, double, triple, and quad rockers, as well as 4 and 8-button face plates. And, all faceplates are interchangeable in the field without ever having to untwist a wire nut!
Newer design allows installation in junction boxes with mud-rings. Traveller wires for multi-way applications are now easier to install.
FEATURES:
ON/OFF control, 200 dimming steps and Resume Dim
Contoured heat sink delivers cooler operation
Interchangeable rocker assemblies – change color and functionality in the field
Dedicated Remote Switch provides inexpensive 3 or more-way control*
Standard Faceplate Colors: White, Almond, Ivory, Black Gloss Finish
High signal strength and low frequency means UPB can communicate over very long A/C wire runs over one mile in length
Multiple keypad configurations available, with up to 4 decorator rockers on a single switch with this Rocker Body!
UPB addressing system uses 250 Unit ID's and 250 Network ID's for a total of 62,500 unique network addresses...plus a secure network password!
Reliable 2-Way digital communication. The transmitter sends a signal and listens to a response from the receiver. The transmitter will continue to re-transmit the signal up to 4 times until it recieves that response
Super-fast command-to-action time...less than 1/3 of a second
Can be used with other PLC systems such as X10 in the same house without interference
Can be used for stand-alone scene lighting control, or with a central controller
Supported by HAI Omni, Stargate, CommStar, ELK M1, Premise Home Control, HAL2000 and more
Each device can be programmed to be part of up to 15 scenes without an intelligent controller
200 dimming steps and variable fade rate from instant-on to a fade rate of up to one hour
The LED lights on the switches can be programmed to show a different color for a different load status, and a locally switched dimmer can be programmed to send a status report to the controller
Shallow switch depth allows for easier J-box installation
No home automation software is required to control UPB products. Basic programming functions are achieved using simple push buttons on the wall switches and modules. Advanced programming options require UPStart UPB Configuration Software. UPStart is a Windows-based program that is used for configuring purposes only, and requires an Interface Module to connect to a PC in the home (SAUMCDB9W)
Specifications:
Power requirements: 120VAC +/- 10%, 60 Hz
Max Load: 600W incandescent and magnetic low voltage
Wiring Connections: 6" stranded pigtails, #16 AWG for power/load #20 AWG for multi-way travellers.
Operating Temp: 30-120 deg F (0-50 deg C)
Dimensions: 4.2H x 1.7W x 1.6D"
Depth inside J-box 1.25"