Compatibility
The Togglelinc V2 Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10. Learn more about
INSTEON here.
Easy To Install
The Togglelinc V2 Dimmer is so easy to install and set up and yet so affordable, you'll want to replace all of your switches with Togglelinc Dimmers. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done.
br /ightness Levels
Adjust the br /ightness level of your light locally by pushing and holding the Togglelinc V2 Dimmer in the on position. Use the br /ightness levels to create just the right amount of lighting for your mood. From the toggle switch you can preset up to 32 br /ightness levels, or program in one-percent increments using software. The white status LED indicates the current status of the light being controlled. When the Togglelinc Dimmer is turned off, the white LED illuminates to help with finding the switch in the dark.
Adjustable Ramp Rate
You can adjust the speed at which the controlled light turns on or off, also known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking, or you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 seconds and 9 seconds if programmed locally and can extend up to 9 minutes when using software.
Create Multi-Way Circuits
Do you have two or three switches that you wish could all control the same light? The Togglelinc Dimmer allows you to customize your lighting scenes without rewiring your home. These complicated lighting circuits are made simple using INSTEON technology because you won't need to use traveler wires to create the electrical connections.
First replace all of the switches you want to include in the circuit with toggles. The primary dimmer must be connected to the standard wires: load, line, neutral, and ground. The secondary dimmers only need to be connected to line, neutral, and ground. Since no traveler wires are needed, it is easy to place a dimmer wherever you need it. Finally, cross-link all of the secondary dimmers to the primary dimmer for a flexible, fully functional multi-way circuit.
Non-Erasable Memory
All Togglelinc V2 Dimmer settings are stored in non-volitale and are not lost during power failures. Additionally, in the event of a power loss, the Togglelinc Dimmer will return to its last br /ightness level when power is restored.