Home :: INSTEON

SwitchLinc V2 3-Way Dimmer Kit

Insteon Switchlinc V2 3-Way Dimmer Kit

INSTEON SwitchLinc 3-Way Dimmer Kit

This kit is an easy way to control lights from two different switches, such as the switches located at the top and bottom of a staircase or on each end of a hallway. The best part is that the two INSTEON SwitchLinc Dimmers (#2476D) come pre-configured and set up to communicate with each other, so once you install the SwitchLincs, there is no setup or programming required in order to control one light with these two switches.

The INSTEON SwitchLinc 3-Way Dimmer Kit replaces your existing mechanical wall switches with INSTEON-compatible wall dimmers. These dimmers install easily, attaching to the same wires that your existing wall switches used with the addition of the neutral wire. You won't need an electrician come out to install complicated wiring in order to create a virtual multi-way circuit. Both dimmers will be able to control the same light. Wall plates are sold separately.

Dim the Same Light from Either Switch

A convenient feature of the INSTEON SwitchLinc 3-Way Dimmer Kit is that you will be able to control the brightness level of the controlled light from either dimmer, a feature not found in many dimmers. Each dimmer also shows the light's current brightness level through each switch's built-in LED brightness bar. This is helpful when one of the dimmers is not in the same room as the controlled light.

Remote-Controllable

One of the advantages of having INSTEON SwitchLinc Dimmers is that you can link other INSTEON devices to control the wall switch dimmers remotely. How many times have you jumped into bed and forgotten to turn the hallway lights off? You now have the convenience of linking a bedside controller to turn off your hallway light after you get into bed. If you would like to create a whole-home lighting automation system, try the INSTEON Wire-in Dimmer Scene Lighting Starter Kit, which includes everything required to set up your INSTEON network, including two SwitchLinc Dimmers, a pair of INSTEON SignaLinc RF Signal Extenders to ensure INSTEON network reliability, and a desktop controller.

Lighting Types

The dimmers are rated for up to 600 watts. If a larger load is needed, a INSTEON SwitchLinc Dimmer (High Wattage) is available. If you have multiple dimmers in the same wall box, the 1000-watt unit may help with keeping the required minimum wattage rating. For info about de-rating, see the spec chart below for the heading: "Mounting." This dimmer switch can control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers. If you need to control a fluorescent light fixture or a non-dimmable appliance, try the INSTEON SwitchLinc Relay (Non-Dimming) instead.

Network Reliability

To ensure network reliability 2 INSTEON SignaLinc RF Signal Extenders are suggested in each home with INSTEON-compatible products. While a single SignaLinc RF will bridge INSTEON signals between radio frequency and powerline signals, two properly installed SignaLinc RFs will also act as powerline signal repeaters, maximizing the reliability of your INSTEON network.

Certifications and Warranty

All INSTEON SwitchLinc products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, SmartLabs stands behind the entire INSTEON SwitchLinc line of products with a full 2-year warranty.


Specifications

General
Brand: Smarthome
Manufacturer: SmartLabs Design
Manufacturer Product No.: 2494m3, INSTEON SwitchLinc 3-Way Dimmer Kit
UPC: 689076404440
Warranty: 2 years (Upgradeable to 7 years)
Operation
On-Levels: 32 locally, increments of 1% with software
Ramp Rates (full-ON to full-OFF): 0.1 to 9 seconds if programmed locally, 0.1 seconds to 9 minutes if programmed remotely
LED Bar Brightness Indicator: 9 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit
Manual Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, X10, INSTEON cleanup
Multi-Way Circuit Support: One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other INSTEON Controllers
Setup Memory: Non-volatile EEPROM
INSTEON Features
INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
INSTEON Links: 417 out of 16,777,216 possible
INSTEON Powerline Frequency: 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level: 1 mVpp nominal
INSTEON Messages Repeated: Yes
Mechanical
Paddle Type: True rocker action
Paddle and Trim Frame Color: White installed; Optional Ivory, Almond, Black, Brown, or Gray with #2400xx kits
Wire Nuts: 5 included
Mounting: Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent SwitchLinc Dimmer installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating.
Operating Conditions: Indoors, 40 to 104°F, up to 85% relative humidity
Dimensions: 4.1" H x 1.8" W x 1.2" D
Weight: 3.6 oz
Electrical
Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection: MOV rated for 150 Volts
Power Wire Leads: 6", 16 AWG, stranded,600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead: 6", 18 AWG, stranded, bare copper
Load Types: Wired-in incandescent lighting devices
Maximum Load: 600 Watts (uses 12-Amp triac dimmer)
Minimum Load: No minimum load required
Certification: Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address: 1 optional (comes unassigned)
X10 Scene Addresses: 255 possible
X10 Status Response: Supported
X10 Resume Dim: Supported (by setting Local On-Level to zero)
X10 Powerline Frequency: 120 KHz
X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level: 10 mVpp nominal
X10 Messages Repeated: No

What's Included:

  • 2 pre-configured SwitchLinc Dimmers
  • Quick-Start Guide
  • 4 mounting screws
  • 6 wire nuts
  • 2 white paddles
2494M3
List Price $94.99
HNA Price $89.99
You Save $5.00 - 5%
Qty

Customer Reviews


Write A Review