- INSTEON compatibility for outstanding performance
- Convenient lighting and appliance remote control from anywhere in the house
- Install and set up in less than 10 minutes
- Includes everything you need
Upgrade your home with automated lighting, appliances, security, and more by installing an INSTEON network. INSTEON is a powerful, home-control networking technology that is affordable and simple to install and use. The dual-band network quickly and reliably transmits INSTEON messages throughout the home both wirelessly (using the Signalinc RFs) and through the home's existing wiring.
This five-piece starter kit includes everything you need to install an INSTEON network and begin enhancing your home with remote control and lighting scenes.
his starter kit includes two Signalinc RFs, the most important part of the INSTEON network. Installing two Signalinc RFs creates your INSTEON network, and adding additional Signalinc RFs or Access Pointswill improve INSTEON signal strength and network coverage throughout your home.
The Controlinc V2 tabletop controller can be set up in less than five minutes to control the two included Switchlinc V2 Dimmers remotely using a simple "Plug and Tap™" setup process. Additional Switchlinc V2 Dimmers can be purchased separately to create more advanced lighting scenes. Each of the five ON/OFF buttons on the Controlinc V2 can be set up to control one light or every light in the home remotely to create dramatic lighting scenes. Additional table Top Controllers (Controlinc) can be purchased separately to add remote control to other rooms. As an example, adding a Controlinc on your bedside table would allow the remote control of downstairs lamps in the middle of the night if you hear a noise.
Specifications |
| Smarthome Design Product No.: |
2492 |
| Warranty: |
2 years |
Specifications |
| Smarthome Design Product No.: |
2430 |
| Dimensions: |
6.4" x 5" x 3" |
| X10 Addresses: |
Up to 5 programmable (comes unassigned); any of 256 possible |
| Button Modes: |
INSTEON only, X10 only, INSTEON and X10 together |
| INSTEON Scenes: |
417 |
| ALL ON/ ALL OFF Buttons: |
Controls INSTEON & X10 devices programmed in channels 1-5 |
| br /ight/Dim: |
Controls last pressed channel (INSTEON and X10 if programmed) |
| Status light: |
Yes (white) |
| Sounding Device: |
Internal beeper (can be disabled) |
| Mounting: |
Included desk stand |
| AC Cord: |
Standard 2-pin polarized |
| Warranty: |
2 years |
Specifications |
| Smarthome Design Product No.: |
2442 |
| Dimensions: |
3 7/8" x 1 1/2" x 2 7/16" |
| Frequency (RF): |
904MHz |
| RF Range: |
150 feet, line of sight |
| Status LED: |
Yes |
| FCC ID: |
SBP2442 |
| Pass Through Outlet: |
Yes, rated for up to 15 amps |
| Outlet # Pins: |
3 |
| Warranty: |
2 years |
Specifications |
| Smarthome Design Product No.: |
2476D |
| Dimensions: |
4" x 2.5" x 1.25" |
| Maximum Wattage |
600 watts |
| Status LED |
Yes |
| Adj. On Level |
Yes |
| Adj. Ramp Rate |
Yes |
| INSTEON Scenes |
417 |
| Status Response (2-Way) |
Yes |
| Load Monitor |
Yes |
| Preset Dim |
Yes |
| Fade On & Off |
Yes |
| X10 Primary Address: |
1 optional (comes unassigned) |
| X10 Scenes: |
256 |
| Pass-Through Outlet: |
Yes, rated for up to 15 amps |
| Outlet # Pins: |
3 |
| Warranty: |
2 years |
What's Included:
- tabletop controller
- 2 RF Signal Enhancer's
- 2 Switchlinc V2 Dimmers
- Quick start guide