- Clean in-wall design blends in anywhere in your home
- Manual ON/OFF button for added convenience
- 15-amp relay allows you to connect devices of any type
- Top outlet is INSTEON controlled; bottom is always on
- Available in white, ivory, almond and black
Do you have lamps and appliances you want to automate that are plugged into exposed outlets? If so, OutletLinc is a perfect fit; it gives you fast, reliable INSTEON control with the sleek look of a modern, decora-style outlet.
Scene Lighting
Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because OutletLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on an INSTEON Controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights and appliances can turn on or off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, try the INSTEON KeypadLinc Dimmer.
Convenient
For added convenience, OutletLinc's bottom outlet is always on. So, whether you need an outlet in the hallway for the vacuum, or an outlet behind the living room couch for an INSTEON tabletop controller, you'll never have to worry about the outlet being switched off. Also, if you ever need to switch the top outlet on manually, you can either use OutletLinc's built-in ON/OFF button (located between its two outlets) or turn your lamp or appliance on and off with its own ON/OFF switch (with load sensing enabled).
X10 Compatible
INSTEON OutletLinc is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the module can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile Memory
All ApplianceLinc settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the OutletLinc will return the appliance to its last on/off state when power is restored.
Certifications and Warranty
All OutletLinc products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. Because of this passion for quality, Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty.
|
Specifications |
| General |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2473SWH, INSTEON OutletLinc, White |
| UPC: |
689076-407748 |
| Warranty: |
2 years (Upgradeable to 7 years) |
| Operation |
| Status LED: |
White |
| Local Control: |
Load Sensing (can be disabled) |
| Setup Memory: |
Non-volatile EEPROM |
| INSTEON Features |
| INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
| INSTEON Links: |
417 out of 16,777,216 possible |
| INSTEON Powerline Frequency: |
131.65 KHz |
| INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
| INSTEON Minimum Receive Level: |
10 mVpp nominal |
| INSTEON Messages Repeated: |
Yes |
| Mechanical |
| Operating Conditions: |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions: |
4.1" H x 1.73" W x 1.73" D |
| Weight: |
3.6 oz. |
| Electrical |
| Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection: |
MOV rated for 150 Volts |
| Neutral Wire: |
Required |
| Power Wire Leads: |
6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), NEUTRAL (white) |
| Ground Lead: |
6", 18 AWG, stranded, bare copper |
| Maximum Load: |
480 Watts (for incandescent loads) |
| Maximum Amps: |
15 Amps (for resistive loads) |
| Minimum Load: |
No minimum load required |
| Certification: |
Safety tested for use in USA and Canada (ETL #3017581) |
| X10 Features |
| X10 Primary Address: |
1 optional (comes unassigned) |
| X10 Scene Addresses: |
255 possible |
| X10 Status Response: |
Supported |
| X10 Powerline Frequency: |
121 KHz |
| X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level: |
20 mVpp nominal |
| X10 Messages Repeated: |
No | |
What's Included:
- INSTEON OutletLinc, White
- 3 wire nuts
- Quick Start Guide