- Award winning - RemoteLinc was recognized by Electronic House as Product of the Year for 2007
- Excellent range; RemoteLinc can be used over 150' from the Access Point
- Easy Plug-In Installation; nothing to hard-wire
- ApplianceLinc supports any type of light or appliance
- Expandable to support more INSTEON-compatible devices (Additional Access Point required)
- You save over $35 by purchasing these products as a kit
Are you tired of the daily ritual of climbing behind the furniture or holiday decorations to turn on and off the lights? Get rid of the chore and automate your lighting this year. The INSTEON Lighting Starter Kit is perfect for homes that don't have switches controlling the correct outlet for your seasonal lighting. As a bonus, the included ApplianceLinc can control any load type, so you can remotely control anything from the spooky smoke machine in your entryway to a mechanical Santa waving to your neighbors from your rooftop.
Easy Setup
The INSTEON Lighting Starter Kit can be set up in less than five minutes to control any connected device remotely using a simple "Plug and Tap" setup process. To control "linked" devices, you can tap one of the RemoteLinc's buttons on or off, or you can hold a button to brighten or dim. Each of the six ON/OFF buttons on the RemoteLinc can be set up to control every light or just one light in your home remotely to create dramatic lighting scenes.
INSTEON Lighting Starter Kit is also available with a black RemoteLinc (2495BK), which features a soft-touch sueded finish.
INSTEON RemoteLinc Wireless Remote Control
The RemoteLinc is the first wireless remote to send INSTEON commands to your lighting and appliances to control them remotely, turning any INSTEON-compatible device in your home on and off at the press of a button. You can even create multiple lighting scenes and dim lights to romantic levels with this handy wireless remote that fits in your hand. Use any of the six buttons to control up to 417 INSTEON devices as well as ALL ON & OFF and DIM/BRIGHT. The RemoteLinc includes a customizable label with a clear mylar protector to keep it clean. INSTEON Access Points (& Wireless Phase Couplers) are required for use of the RemoteLinc; one is included in this kit. Note: The INSTEON RemoteLinc is not X10 compatible.
INSTEON ApplianceLinc (3-Pin) — Our Most Advanced Remote-Controllable Plug-In On/Off Switch
The INSTEON ApplianceLinc (3-Pin) is a full-featured plug-in on/off switch that can be remotely controlled by a INSTEON ControLinc Tabletop Controller, INSTEON KeypadLinc Dimmer, or any other INSTEON-compatible controller. This simple-to-use plug-in on/off switch has advanced features like local control, so you can still use the appliance's built-in switch to turn device on and off. The ApplianceLinc is made to plug into a 3-pin outlet. This on/off module controls all standard appliances like fans, fluorescent lights, and many other non-dimmable devices up to 15 amps and incandescent lights up to 480 watts. If you need to control a dimmable lamp, try the LampLinc Dimmer (3-Pin), which allow on/off and brightness control.
INSTEON Access Point (& Wireless Phase Coupler)
INSTEON is a powerful, home-control networking technology that will enhance the comfort, safety, convenience and value of your home. The Access Point is the most important part of the INSTEON network. Access Points allow RF-only INSTEON devices (like a RemoteLinc) to send commands to power line-only INSTEON devices (like a ApplianceLinc). If you need more coverage for your INSTEON RF devices, you only need to add another Access Point. Also, when used in pairs, Access Points can couple the phases in your electrical wiring allowing commands to freely travel to all locations in your home.
Certifications and Warranty
All SmartLabs Design products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind its entire line of products with a full 2-year warranty.
|
Specifications |
|
General |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2440 |
| Range: |
150' (line of sight) |
| Frequency: |
915 MHz |
| Warranty: |
2 years, limited |
| UPC: |
689076-407946 |
|
Operation |
| ON/OFF Button Pairs: |
6 channels |
| ALL ON/ALL OFF Buttons: |
1 Channel + Control all INSTEON devices linked to Channels 1-6 |
| BRIGHT/DIM Buttons: |
Control INSTEON devices linked to last-pressed channel |
| Audio Alert: |
Beeper, can be disabled |
| Status LED: |
White, can be disabled |
| Setup Memory: |
Non-volatile EEPROM |
|
INSTEON Features |
| INSTEON Addresses: |
1 hard-coded out of 16,777,216 |
| INSTEON Links: |
417 out of 16,777,216 |
| INSTEON Messages Repeated: |
Yes |
|
Mechanical |
| Button Labels: |
Printable using template |
| Operating Conditions: |
Indoors, 32º F to 122º F, up to 85% relative humidity |
| Dimensions: |
5 3/8" H x 2 1/2" W x 1 1/8" D |
| Weight: |
.35 lb. (with batteries), .25 lb. (without batteries) |
|
Electrical |
| Power: |
4 AAA Alkaline Batteries (included) or 4 rechargeable AAA batteries |
| Battery Life: |
Approx. 1500-2000 button presses |
| Certification: |
FCC ID SBP2440 |
|
Specifications |
| General |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2456S3, INSTEON ApplianceLinc (3-Pin) |
| Warranty: |
2 years (upgradedable to 7 years) |
| Operation |
| Status LED: |
White |
| Local Control: |
Load sensing (can be disabled) |
| Setup Memory: |
Non-volatile EEPROM |
| INSTEON Features |
| INSTEON Addresses: |
1 hard-coded out of 16,777,216 possible |
| INSTEON Links: |
417 |
| INSTEON Powerline Frequency: |
131.65 KHz |
| INSTEON Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
| INSTEON Minimum Receive Level: |
10 mVpp nominal |
| INSTEON Messages Repeated: |
Yes |
| Mechanical |
| Operating Conditions: |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions: |
4.0" H x 2.5" W x 1.5" D |
| Weight: |
5 oz |
| Electrical |
| Supply Voltage: |
120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection: |
MOV rated for 150 Volts |
| Power Plug: |
3-pin grounded |
| Pass-through Outlet: |
3-pin grounded |
| Controlled Outlet: |
3-pin grounded |
| Maximum Load: |
480 Watts |
| Maximum Amps: |
15 Amps (for inductive loads) |
| Certification: |
Safety tested for use in USA and Canada (ETL #3017581) |
| X10 Features |
| X10 Primary Address: |
1 optional (comes unassigned) |
| X10 Scene Addresses: |
255 possible |
| X10 Status Request: |
Supported |
| X10 Powerline Frequency: |
121 KHz |
| X10 Minimum Transmit Level: |
3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level: |
20 mVpp nominal |
| X10 Messages Repeated: |
No |
|
Specifications |
| Brand: |
Smarthome |
| Manufacturer: |
SmartLabs Design |
| Manufacturer Product No.: |
2443 |
| UPC: |
689076406840 |
| Dimensions: |
3 7/8" x 1 1/2" x 2 7/16" |
| Frequency: |
915 MHz |
| RF Range: |
200 feet, line of sight |
| Status LED: |
Yes |
| FCC ID: |
SBP2443 |
| Warranty: |
2 years |
What's Included:
- 1 INSTEON RemoteLinc (batteries included)
- 1 INSTEON Access Point
- 1 INSTEON ApplianceLinc (3-pin)
- Quick-start guides