The HAI UPB™ 1000W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.
Switch Operation
The 1000W switch has a Decora-style rocker switch that may be used to control the lighting load as follows:
|
Rocker Event |
Top Rocker |
Bottom Rocker |
| Single-Tap |
Brightens the light towards fully on |
Fades the light to fully off |
| Double-Tap |
Snaps the light to fully on |
Snaps the light to fully off |
| Hold |
Starts brightening the light towards fully on |
Starts dimming the light towards fully off |
| Release |
Stops brightening the light |
Stops dimming the light |
Switch LED
The 1000W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows:
Switch is off - LED is blue
Switch is on - LED is off
You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).
De-rating
When this switch is mounted in a normal depth wall box it must be de-rated from 1000W down to 900W.
For a proper fit in a multiple gang installation, it may be necessary to remove one or both of the break-off tabs on the sides of the 1000W switch. When tabs are removed, the overall rating of the device must be reduced in accordance with the following chart:
|
Description |
Load |
| Device Maximum Load |
1000W |
| No Fins Removed Deep Box |
1000W |
| No Fins Removed Normal Depth Box |
900W |
| One Fin Removed Next to One Dimmer |
800W |
| Both Fins Removed Next to Two Dimmers |
600W |
Configuration Software
You may change the function of this dimming switch to be non-dimming or vice-versa using the HAI UPB™ UPStart configuration software. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.