Scene setup at the touch of one button
10 non-sequential user-programmable soft-touch buttons
Easily access all 256 X10 addresses
Multi-house code programmable All Lights On/All Units Off buttons
The ControLinc Maxi is the X10 controller you have been waiting for, and it's the last X10 controller you will ever buy (except you will want one for every room in the house). User-programmable buttons eliminate having everything on the same house code, i.e. program button 1 to M3, button 2 to A7, button 3 to D12, etc. Enrolling scene-compatible Smarthome Design products is as simple as one button press, so you'll never again have to experience tedious MNOP programming sequences.
Flexible: User-Programmable Buttons
Each of the ControLinc Maxi's 10 buttons can be programmed to any of the 256 X10 addresses. No longer are you constrained to sequential buttons, such as M1, M2, M3, and M4. Program any X10 address to the button of your choice.
Programming Buttons for Smarthome Scene-Compatible Products
The ControLinc Maxi includes four pre-programmed buttons that enable easy programming of scene-enabled Smarthome products. These buttons will send the unique "M-N-O-P" codes (i.e. "Clear Sequence") necessary to set up scenes.
Simple Guest-Friendly Soft-Touch On/Off Buttons
Once you press the soft-touch buttons on the Maxi, you will never want to go back to your other controller again. The buttons are durable rubber and allow for tactile feedback and a nice button press.
Easily Access all 256 PLC Addresses
Code wheels and sliders are a thing of the past. Open the cover of the Maxi to gain access to all 256 X10 addresses.
Multi-House Code-Programmable All Lights On/All Units Off Buttons
You can assign up to 4 house codes to the All Lights On and All Units Off buttons. No longer are you constrained to the last house code pressed.
|
Specifications |
| Smarthome Product Number |
4071 |
| Warranty |
2 years, limited |
|
Operation |
| ON/OFF Button Pairs |
5 Channels or 10 Buttons |
| ALL ON/ALL OFF Buttons |
Control all X10 devices linked to Channels 1-5 (Or Top 5 Buttons) |
| BRIGHT/DIM Buttons |
Control X10 devices linked to last pressed Channel |
| Audio Alert |
Beeper, can be disabled |
| Status LED |
Green, can be disabled |
| Button Modes |
House Code (HC) Only, Unit Code (UC) Only, HC+UC, HC+UC+Command |
| Combo Mode Message Order |
Toggle and Non-toggle, Address Only, Command Only, Address and Command |
| Setup Memory |
Non-volatile EEPROM |
|
X10 Features |
| X10 Addresses |
All of the 256 possible |
| X10 Status Response |
Supported |
| X10 Powerline Frequency |
121 kHz |
| X10 Minimum Transmit Level |
3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level |
10 mVpp nominal |
| X10 Messages Repeated |
No |
|
Mechanical |
| Mounting |
Included desk stand (flat or vertical) |
| Button Labels |
Printable using template |
| Operating Conditions |
Indoors, 32 to 122°F, up to 85% relative humidity |
| Dimensions |
5.0" H x 6.4" W x 3.0" D |
| Weight |
1 lb 5 oz |
|
Electrical |
| Supply Voltage |
120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection |
MOV rated for 150 Volts |
| Power Cord |
6 ft, 2-pin polarized plug |
| Certification |
Safety tested for use in USA and Canada (ETL #3017581) |
What's Included:
ControLinc Maxi
Quick-start guide
Two year warranty
|